Product overview
Mini Repair Clamp
The Mini Repair Clamp is used where the pipe diameter, defect size and installation clearance suit a compact clamp. The exact semi-circle or full-circle arrangement must be confirmed from the selected product and site condition.
Compact full- or semi-circle repair option for smaller pipe sizes.
Technical reference
Technical basis for Mini Repair Clamp
Small-pipe OD bands confirmed from measured outside diameter. Product size, pipe and defect dependent. Use these points to identify the right drawing—not as a universal rating for every configuration.
- Connection
- Compact bolted repair clamp in a product-dependent wrap configuration
- Material basis
- Stainless steel clamp components with a product-selected elastomer gasket
- Reference range
- Small-pipe OD bands confirmed from measured outside diameter
- Pressure / duty
- Product size, pipe and defect dependent
Selection focus
Four checks for this mini pipe repair clamp
- 1Measure exact OD and defect dimensions rather than estimating from DN.
- 2Confirm whether full-circle gasket coverage is required.
- 3Check pipe-wall condition and straight sealing length around the defect.
- 4State pressure, medium, temperature and installation clearance.
Installation notes for Mini Repair Clamp
- Do not place the gasket edge across the defect.
- A compact clamp is unsuitable for widespread wall loss.
- Use the supplied bolt sequence and verify the repair after pressure returns.
Choosing Mini Repair Clamp
The mini format is chosen for a small, well-defined defect with sufficient sound pipe around it. Move to CR-1 or another full-length band when the defect is wider, the pipe surface is irregular or the gasket needs more sealing distance.
Compare all repair clampsCompare configurations
Related repair clamps
Frequently asked questions
Mini Repair Clamp FAQ
Where is a mini repair clamp most useful?
It is intended for localized repairs on compatible small-diameter pipe where the exact OD, defect size and access space suit the compact clamp. It is not a substitute for assessing widespread pipe deterioration.
Which site measurements are essential for a mini clamp?
Measure the pipe OD, circumference if practical, damaged length and clearance around nearby walls or fittings. State the pipe material, pressure and medium and attach a clear photograph of the defect.
How can gasket displacement be avoided on a small repair?
Clean the pipe, centre the gasket over the leak and hold the clamp square while engaging the fasteners. Tighten progressively and evenly, then inspect the entire sealing edge during testing.
Ready for technical review?