Product overview
Stainless Steel Band Repair Clamp CR-1
The CR-1 is the documented single-band configuration. It provides a full-circumference mechanical seal when the chosen OD band and clamp length cover the complete defect on sound pipe surface.
Single-band clamp documented for localized pipe defects.
Technical reference
Technical basis for Stainless Steel Band Repair Clamp CR-1
Reference OD coverage 59–366 mm. Reference classes PN10 and PN16; defect and pipe condition may reduce suitability. Use these points to identify the right drawing—not as a universal rating for every configuration.
- Connection
- Full-circle single-band bolted repair clamp
- Material basis
- Documented SS304 shell with EPDM gasket on referenced configurations
- Reference range
- Reference OD coverage 59–366 mm
- Pressure / duty
- Reference classes PN10 and PN16; defect and pipe condition may reduce suitability
Selection focus
Four checks for this stainless steel band repair clamp CR-1
- 1Measure exact pipe OD and the complete defect length and width.
- 2Confirm pipe material, wall integrity and surface profile.
- 3Choose a clamp length that seals beyond the damage on sound surface.
- 4State pressure, temperature and whether the line can be isolated.
Installation notes for Stainless Steel Band Repair Clamp CR-1
- A repair clamp seals; it does not restore lost pipe-wall strength.
- Live-line work requires explicit operator and product approval.
- Tighten from the centre outward in staged increments where instructed.
Choosing Stainless Steel Band Repair Clamp CR-1
CR-1 suits a localized defect that fits within one confirmed band and sealing length. Compare FCE or FCD connector formats when the task also involves joining pipe ends, and choose a longer or multi-section repair arrangement when sound sealing surface is farther from the damage.
Compare all repair clampsCompare configurations
Related repair clamps
Frequently asked questions
Stainless Steel Band Repair Clamp CR-1 FAQ
What type of pipe damage can a CR-1 repair clamp address?
CR-1 is considered for localized external repair where the prepared pipe surface, outside diameter and damaged length fit the selected stainless steel band. The defect must first be assessed as suitable for clamp repair.
How is the required CR-1 clamp length determined?
Measure the full damaged area and allow adequate sealing coverage beyond it according to the repair procedure. Report the exact pipe OD, defect position, orientation and available installation clearance.
Can a repair clamp restore a structurally failed pipe?
A clamp should not be assumed to replace missing pipe strength. Cracks, severe corrosion, deformation or active movement require engineering assessment before a temporary or permanent repair method is approved.
Ready for technical review?