Product overview
Steel Dismantling Joint VSSJA B2F
The VSSJA B2F is a fabricated steel configuration used where the project specification calls for steel construction and a restrained adjustable connection. Dimensions, coating and duty are prepared against the piping schedule rather than assumed from DN alone.
Fabricated steel option with tie rods for installation adjustment.
Technical reference
Technical basis for Steel Dismantling Joint VSSJA B2F
Project-specific DN and face-to-face dimensions. Project-specific pressure and temperature rating. Use these points to identify the right drawing—not as a universal rating for every configuration.
- Connection
- B2F flanged adjustable assembly with longitudinal tie rods
- Material basis
- Fabricated steel body; grade, coating, gasket and bolts by approved schedule
- Reference range
- Project-specific DN and face-to-face dimensions
- Pressure / duty
- Project-specific pressure and temperature rating
Selection focus
Four checks for this VSSJA B2F steel dismantling joint
- 1Provide a dimensioned layout showing mating equipment and available gap.
- 2Specify flange standard, pressure, medium and operating temperature.
- 3Confirm required body material, coating system and corrosion environment.
- 4Have the piping designer define anchors, guides and external loads.
Installation notes for Steel Dismantling Joint VSSJA B2F
- B2F and C2F designations are not interchangeable without drawing review.
- Field welding or coating repair requires the approved project procedure.
- Final dimensions and ratings appear on the quotation drawing.
Choosing Steel Dismantling Joint VSSJA B2F
B2F should be quoted only against the project designation and drawing. If the tender names C2F, or if both ends and tie-rod arrangement differ from the B2F schedule, compare the C2F configuration before accepting dimensions or drilling.
Compare all dismantling jointsCompare configurations
Related dismantling joints
Frequently asked questions
Steel Dismantling Joint VSSJA B2F FAQ
When should a VSSJA B2F steel dismantling joint be specified?
Start with the B2F configuration when the project calls for fabricated steel construction and its restraint arrangement matches the piping detail. A dimensioned layout is essential because the face-to-face length, coating and duty may be engineered for the installation.
Is B2F interchangeable with a C2F dismantling joint?
Not without a drawing review. The end arrangement, tie-rod layout and installation dimensions can differ. Quote the exact designation shown on the tender or submit the piping drawing for confirmation before manufacture.
What coating information should accompany a B2F enquiry?
State the internal and external exposure, specified coating system, colour if controlled, surface preparation requirement and any field-repair procedure. Also identify the medium and temperature so material compatibility can be reviewed.
Ready for technical review?