Product overview
Universal Saddle Clamp
The universal saddle can reduce the number of pipe-specific bands in a mixed network, but each installation still requires OD and material verification. Universal describes the available fit range, not unlimited compatibility.
Wide-range saddle for compatible water-pipe outside diameters.
Technical reference
Technical basis for Universal Saddle Clamp
Reference universal coverage DN50–DN700. Reference classes PN10 and PN16. Use these points to identify the right drawing—not as a universal rating for every configuration.
- Connection
- Wide-range two-part saddle with selected branch outlet
- Material basis
- Documented ductile iron body with elastomer gasket and bolt options
- Reference range
- Reference universal coverage DN50–DN700
- Pressure / duty
- Reference classes PN10 and PN16
Selection focus
Four checks for this universal saddle clamp
- 1Measure pipe OD and identify DI, steel, PVC or PE material.
- 2Confirm outlet type, size, orientation and drilling method.
- 3Check pipe support and restraint for plastic-pipe applications.
- 4State pressure, medium, gasket and coating requirements.
Installation notes for Universal Saddle Clamp
- Verify the selected band against actual OD before tapping.
- Pipe-material-specific installation controls still apply.
- Non-stop installation is only considered under an approved live-line method.
Choosing Universal Saddle Clamp
Choose the universal saddle when the same project contains compatible DI, steel, PVC or PE outside diameters. Use a pipe-specific DI or HDPE saddle when the material is fixed, and move to the flanged saddle tee for a larger flanged branch.
Compare all saddle clampsCompare configurations
Related saddle clamps
Frequently asked questions
Universal Saddle Clamp FAQ
How is a universal saddle clamp matched to an existing water main?
Measure the pipe outside diameter and identify its material and surface condition. Then match the confirmed OD band, outlet specification, gasket compound and pressure duty to the proposed branch.
Can a universal saddle be stocked for several pipe materials?
A wide OD band can simplify inventory, but compatibility still depends on pipe stiffness, surface, branch size and tightening limits. Confirm each intended pipe material rather than assuming one installation method fits all.
What outlet details are needed for a threaded universal saddle?
Provide the thread standard, nominal outlet size, branch orientation and connected fitting. The main pipe OD, operating pressure and tapping procedure are also required for technical review.
Ready for technical review?