Product overview
Universal Saddle Flange Tee
The Universal Saddle Flange Tee combines the universal saddle concept with a flanged branch. It is considered when the branch size or connected valve requires a flange rather than a threaded outlet.
Flanged branch outlet for project-specific connection requirements.
Technical reference
Technical basis for Universal Saddle Flange Tee
Main-pipe and outlet sizes confirmed from the project schedule. Reference PN10/PN16 family; flange drilling and ordered configuration govern. Use these points to identify the right drawing—not as a universal rating for every configuration.
- Connection
- Two-part universal saddle with flanged tee outlet
- Material basis
- Ductile iron saddle and outlet body with elastomer sealing system
- Reference range
- Main-pipe and outlet sizes confirmed from the project schedule
- Pressure / duty
- Reference PN10/PN16 family; flange drilling and ordered configuration govern
Selection focus
Four checks for this universal saddle flange tee clamp
- 1Provide main-pipe material, OD and wall class.
- 2Specify branch DN, flange drilling and valve orientation.
- 3Confirm branch loads, supports and tapping method.
- 4State pressure, medium, coating and gasket requirements.
Installation notes for Universal Saddle Flange Tee
- Support the branch so its weight is not carried by the saddle alone.
- Align the flange before drilling or connecting the branch valve.
- Live tapping requires utility approval and a dedicated method statement.
Choosing Universal Saddle Flange Tee
The flanged tee outlet is the defining feature. Compare the standard universal saddle for threaded or smaller service outlets; compare pipe-specific saddles where the main-pipe material, wall class or tightening control requires a dedicated configuration.
Compare all saddle clampsCompare configurations
Related saddle clamps
Frequently asked questions
Universal Saddle Flange Tee FAQ
When is a flanged saddle tee preferred over a threaded saddle outlet?
A flanged outlet is considered for larger branches or when the connected valve or fitting already uses a specified flange. The branch size, drilling, pressure class and external load must be defined.
Which flange dimensions are needed for a universal saddle tee?
State the outlet nominal size, flange standard, pressure class, drilling pattern and connected equipment details. Also provide the main pipe OD and the required branch orientation.
How should the branch load be managed after installation?
Support the valve and branch pipe independently so their weight, vibration and operating forces are not carried by the saddle. The piping designer should verify the complete load path before commissioning.
Ready for technical review?